Kernel driver `w83l785ts.o'
===========================

Status: Beta, slightly tested

Supported chips: 
  * Winbond W83L785TS-S
    Prefix: 'w83l785ts'
    Addresses scanned: I2C 0x2e
    Datasheet: Publicly available at the Winbond USA website
               http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf


Author: Jean Delvare <khali@linux-fr.org>

License: GPL


Module Parameters
-----------------

* force: short array (min = 1, max = 48)
  List of adapter,address pairs to boldly assume to be present
* force_w83l785ts: short array (min = 1, max = 48)
  List of adapter,address pairs which are unquestionably assumed to contain
  a `w83l785ts' chip
* probe: short array (min = 1, max = 48)
  List of adapter,address pairs to scan additionally
* probe_range: short array (min = 1, max = 48)
  List of adapter,start-addr,end-addr triples to scan additionally
* ignore: short array (min = 1, max = 48)
  List of adapter,address pairs not to scan
* ignore_range: short array (min = 1, max = 48)
  List of adapter,start-addr,end-addr triples not to scan


Description
-----------

The W83L785TS-S is a digital temperature sensor. It senses the
temperature of a single external diode. The high limit is
theoretically defined as 85 or 100 degrees C through a combination
of external resistors, so the user cannot change it. Values seen so
far suggest that the two possible limits are actually 95 and 110
degrees C. The datasheet is rather poor and obviously inaccurate
on several points including this one.

All temperature values are given in degrees Celsius. Resolution
is 1.0 degree. See the datasheet for details.

The w83l785ts driver will not update its values more frequently than
every other second; reading them more often will do no harm, but will
return 'old' values.


Known Issues
------------

On some systems (Asus), the BIOS is known to interfere with the driver
and cause read errors. The driver will retry a given number of times
(5 by default) and then give up, returning the old value (or 0 if
there is no old value). It seems to work well enough so that you should
not notice anything. Thanks to James Bolt for helping test this feature.


Chip Features
-------------

Chip 'w83l785ts'

LABEL                 LABEL CLASS           COMPUTE CLASS          MODE  MAGN
temp                  -                     -                       R-     0
temp_high             temp                  temp                    R-     0

LABEL                 FEATURE SYMBOL                              SYSCTL FILE:N
temp                  SENSORS_W83L785TS_TEMP                             temp:2
temp_high             SENSORS_W83L785TS_TEMP_OVER                        temp:1