#!/bin/sh
#
### BEGIN INIT INFO
# Provides:			lm_sensors
# Required-Start:		$local_fs 
# X-UnitedLinux-Should-Start:	
# Required-Stop:		$local_fs 
# X-UnitedLinux-Should-Stop:	
# Default-Start:		3 4 5
# Default-Stop:			0 1 2 6
# Short-Description:		LM Sensors
# Description:			LM Sensors for hardware monitoring
### END INIT INFO
# chkconfig: 2345 26 74
# description: sensors is used for monitoring motherboard sensor values.
# config: /etc/sysconfig/lm_sensors
#
#    This program is free software; you can redistribute it and/or modify
#    it under the terms of the GNU General Public License as published by
#    the Free Software Foundation; either version 2 of the License, or
#    (at your option) any later version.
#
#    This program is distributed in the hope that it will be useful,
#    but WITHOUT ANY WARRANTY; without even the implied warranty of
#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#    GNU General Public License for more details.
#
#    You should have received a copy of the GNU General Public License
#    along with this program; if not, write to the Free Software
#    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

# See also the lm_sensors homepage at:
#     http://www.lm-sensors.org

# It uses a config file /etc/sysconfig/lm_sensors that contains the modules
# to be loaded/unloaded. That file is sourced into this one.

# The format of that file a shell script that simply defines the modules 
# in order as normal shell variables with the special names:
#    MODULE_1, MODULE_2, MODULE_3, etc.

# If sensors isn't supported by the kernel, try loading the module...
[ -e /proc/sys/dev/sensors ] || /sbin/modprobe i2c-proc &>/dev/null

# Don't bother if /proc/sensors still doesn't exist, kernel doesn't have
# support for sensors.
[ -e /proc/sys/dev/sensors ] || exit 0

# If sensors was not already running, unload the module...
[ -e /var/lock/subsys/lm_sensors ] || /sbin/modprobe -r i2c-proc &>/dev/null

CONFIG=/etc/sysconfig/lm_sensors
PSENSORS=/usr/local/bin/sensors

# Source function library.
#. /etc/init.d/functions

# Shell functions sourced from /etc/rc.status:
#      rc_check         check and set local and overall rc status
#      rc_status        check and set local and overall rc status
#      rc_status -v     ditto but be verbose in local rc status
#      rc_status -v -r  ditto and clear the local rc status
#      rc_status -s     display "skipped" and exit with status 3
#      rc_status -u     display "unused" and exit with status 3
#      rc_failed        set local and overall rc status to failed
#      rc_failed <num>  set local and overall rc status to <num>
#      rc_reset         clear local rc status (overall remains)
#      rc_exit          exit appropriate to overall rc status
#      rc_active	checks whether a service is activated by symlinks
#      rc_splash arg    sets the boot splash screen to arg (if active)
. /etc/rc.status

# Reset status of this service
rc_reset

# Return values acc. to LSB for all commands but status:
# 0	  - success
# 1       - generic or unspecified error
# 2       - invalid or excess argument(s)
# 3       - unimplemented feature (e.g. "reload")
# 4       - user had insufficient privileges
# 5       - program is not installed
# 6       - program is not configured
# 7       - program is not running
# 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
# 
# Note that starting an already running service, stopping
# or restarting a not-running service as well as the restart
# with force-reload (in case signaling is not supported) are
# considered a success.

RETVAL=0

start() {
	echo -n $"Starting up sensors: "
	test -r "$CONFIG" && . "$CONFIG"

        modules=`grep \^MODULE_ $CONFIG | wc -l | tr -d ' '`
        i=0
        while [ $i -lt $modules ] ; do
                module=`eval echo '$'MODULE_$i`
		echo starting module __${module}__
		/sbin/modprobe $module &>/dev/null
		i=`expr $i + 1`
	done
        $PSENSORS -s

	RETVAL=$?
	if [ $RETVAL -eq 0 ] && touch /var/lock/subsys/lm_sensors ; then
	    rc_status -v
	else
	    rc_status -v
	fi
}

stop() {
	echo -n $"Shutting down sensors: "
	test -r "$CONFIG" && . "$CONFIG"

        modules=`grep \^MODULE_ $CONFIG | wc -l | tr -d ' '`
        i=`expr $modules`
        while [ $i -ge 0 ] ; do
                module=`eval echo '$'MODULE_$i`
		/sbin/modprobe -r $module &>/dev/null
		i=`expr $i - 1`
	done
	/sbin/modprobe -r i2c-proc &>/dev/null

	RETVAL=$?
	if [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/lm_sensors ; then
	    rc_status -v
	else
	    rc_status -v
	fi
}

dostatus() {
        $PSENSORS
	RETVAL=$?
}

restart() {
	stop
	start
	RETVAL=$?
}

condrestart() {
	[ -e /var/lock/subsys/lm_sensors ] && restart || :
}

# See how we were called.
case "$1" in
  start)
	start
	;;
  stop)
	stop
	;;
  status)
	dostatus
	;;
  restart|reload)
	restart
	;;
  condrestart)
	condrestart
	;;
  *)
	echo "Usage: sensors.init {start|stop|status|restart|reload|condrestart}"
	exit 1
esac

exit $RETVAL